Toyota Carina PCD

1992–1997

VERIFIED

Centre bore54.1 mm

Offset (ET)ET39

Fixing typeEcrous - 12x1.50

Tightening torque103 Nm

Hub centric rings 54.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Carina

A Toyota Carina (1992–1997) uses a 5x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x100 required. See all vehicles with 5x100.
Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
Offset: the original is ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Carina without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Yaris IV from 2020 Toyota Corolla US 2013–2019 Toyota Verso S from 2010 Toyota Urban Cruiser from 2009 Toyota Avensis II 2003–2008 Toyota Yaris I 1999–2005 Toyota Avensis 1998–2003 Toyota Prius 1997–2003 Toyota Carina 5 trou 1988–1992 Toyota Camry 1982–1986 Toyota Celica 1971–1977 Mazda Mazda2 Hybrid from 2022 Lexus CT200h from 2011 Subaru Trezia 2010–2016

Will wheels from another vehicle fit your Carina?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 54.1 mm, and will not fit if it is smaller.

Toyota Aygo X ⌀60.1 Toyota GT 86 ⌀56.1 Toyota Voltz ⌀73.1 MG Astor ⌀57.1 Skoda Fabia IV ⌀57.1 Volkswagen Taigo ⌀57.1 Skoda Kamiq GT ⌀57.1 Audi A1 Citycarver ⌀57.1

Frequently asked questions

What is the PCD of a Toyota Carina?

A Toyota Carina (1992–1997) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Toyota Carina need a hub centric ring?

The centre bore (hub diameter) of a Toyota Carina is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Carina?

The recorded original offset is ET39. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Carina?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Carina?

With the same PCD (5x100) and the same centre bore (54.1 mm), these include: Toyota Yaris IV, Toyota Corolla US, Toyota Verso S, Toyota Urban Cruiser. Offset, width and rim diameter still need checking for each vehicle.

Other Toyota models

BZ4X 5x114.3 Yaris Cross 5x114.3 Aygo X 4x100 Yaris IV 5x100 Corolla Cross 5x114.3 RAV4 V 5x114.3 Corolla E210 5x114.3 Supra MK5 5x112 Century 5x120 Corolla EU 5x114.3 C-HR 5x114.3 Mirai 5x114.3 All Toyota →

Does a value look wrong, or is a version missing? Let us know, we check every report.