FRENES

Volkswagen Cross Polo PCD

2006–2009
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET38
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres185/55R15, 185/60R15
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Cross Polo

A Volkswagen Cross Polo (2006–2009) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/55R15, 185/60R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm 6Jx15 ET38 185/55R15
Version 2 5x100 57.1 mm 6Jx15 ET38 185/60R15

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Cross Polo without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Taigo from 2021 Volkswagen T-Cross from 2019 Volkswagen Polo AW from 2017 Volkswagen Polo 6R 2009–2017 Volkswagen Golf 4 R32 2002–2004 Volkswagen Polo 9N 2001–2009 Volkswagen Bora 1998–2006 Volkswagen New Beetle 15 inch 1998–2011 Volkswagen New Beetle 16 inch 1998–2011 Volkswagen Golf 4 1997–2003 Volkswagen Vento VR6 1995–1998 Volkswagen Passat 5 trou 1993–1996 Volkswagen Jetta VR6 1992–1999 Volkswagen Corrado VR6 1991–1996 Volkswagen Golf 3 GTI,VR6 1991–1997 Volkswagen Passat B4 VR6 1991–1996

Will wheels from another vehicle fit your Cross Polo?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen Cross Polo?

A Volkswagen Cross Polo (2006–2009) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Volkswagen Cross Polo need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Cross Polo is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Cross Polo?

The recorded original offset is ET38 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Cross Polo?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen Cross Polo?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Volkswagen Taigo, Volkswagen T-Cross, Volkswagen Polo AW, Volkswagen Polo 6R. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.