Volkswagen Passat 5 trou PCD

1993–1996

VERIFIED

Centre bore57.1 mm

Offset (ET)ET38

Fixing typeM14x1.50

Tightening torque110 Nm

Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Passat 5 trou

A Volkswagen Passat 5 trou (1993–1996) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x100 required. See all vehicles with 5x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Passat 5 trou without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Taigo from 2021 Volkswagen T-Cross from 2019 Volkswagen Polo AW from 2017 Volkswagen Polo 6R 2009–2017 Volkswagen Cross Polo 2006–2009 Volkswagen Golf 4 R32 2002–2004 Volkswagen Polo 9N 2001–2009 Volkswagen Bora 1998–2006 Volkswagen New Beetle 15 inch 1998–2011 Volkswagen New Beetle 16 inch 1998–2011 Volkswagen Golf 4 1997–2003 Volkswagen Vento VR6 1995–1998 Volkswagen Jetta VR6 1992–1999 Volkswagen Corrado VR6 1991–1996 Volkswagen Golf 3 GTI,VR6 1991–1997 Volkswagen Passat B4 VR6 1991–1996

Will wheels from another vehicle fit your Passat 5 trou?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Mazda Mazda2 Hybrid ⌀54.1 Toyota Aygo X ⌀60.1 Toyota Yaris IV ⌀54.1 Toyota Corolla US ⌀54.1 Subaru BRZ ⌀56.1 Toyota GT 86 ⌀56.1 Lexus CT200h ⌀54.1 Subaru XV ⌀56.1

Frequently asked questions

What is the PCD of a Volkswagen Passat 5 trou?

A Volkswagen Passat 5 trou (1993–1996) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Volkswagen Passat 5 trou need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Passat 5 trou is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Passat 5 trou?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Passat 5 trou?

The specified tightening torque is 110 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen Passat 5 trou?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Volkswagen Taigo, Volkswagen T-Cross, Volkswagen Polo AW, Volkswagen Polo 6R. Offset, width and rim diameter still need checking for each vehicle.

Other Volkswagen models

Transporter T7 6x120 Tayron 5x112 Passat B9 5x112 ID.7 5x112 ID.Buzz axe arrière 5x112 ID.Buzz axe avant 5x112 ID.5 axe avant 5x112 ID.5 axe arrière 5x112 ID.6 X axe arrière 5x112 Taigo 5x100 ID.6 Crozz axe arrière 5x112 ID.6 Crozz axe avant 5x112 All Volkswagen →

Does a value look wrong, or is a version missing? Let us know, we check every report.