FRENES

Volkswagen T-Cross PCD

from 2019
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET35
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres205/60R16
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen T-Cross

A Volkswagen T-Cross (from 2019) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen T-Cross without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Taigo from 2021 Volkswagen Polo AW from 2017 Volkswagen Polo 6R 2009–2017 Volkswagen Cross Polo 2006–2009 Volkswagen Golf 4 R32 2002–2004 Volkswagen Polo 9N 2001–2009 Volkswagen Bora 1998–2006 Volkswagen New Beetle 15 inch 1998–2011 Volkswagen New Beetle 16 inch 1998–2011 Volkswagen Golf 4 1997–2003 Volkswagen Vento VR6 1995–1998 Volkswagen Passat 5 trou 1993–1996 Volkswagen Jetta VR6 1992–1999 Volkswagen Corrado VR6 1991–1996 Volkswagen Golf 3 GTI,VR6 1991–1997 Volkswagen Passat B4 VR6 1991–1996

Will wheels from another vehicle fit your T-Cross?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen T-Cross?

A Volkswagen T-Cross (from 2019) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Volkswagen T-Cross need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen T-Cross is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen T-Cross?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen T-Cross?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen T-Cross?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Volkswagen Taigo, Volkswagen Polo AW, Volkswagen Polo 6R, Volkswagen Cross Polo. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.