A Volkswagen Polo 6R (2009–2017) uses a 5x100 PCD and a centre bore of 57.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET35 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5, tightened to 125 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/70R14, 185/60R15, 195/55R16, 215/45R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
All recorded versions (8)
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x100
57.1 mm
5Jx14
ET35
175/70R14
Version 2
5x100
57.1 mm
6Jx15
ET40
185/60R15
Version 3
5x100
57.1 mm
6Jx15
ET38
185/60R15
Version 4
5x100
57.1 mm
5.5Jx15
ET38
185/60R15
Version 5
5x100
57.1 mm
6Jx16
ET38
195/55R16
Version 6
5x100
57.1 mm
7Jx16
ET46
215/45R16
GTI 1.4 TSI
5x100
57.1 mm
7Jx17
ET46
215/40R17
GTI 1.8 TSI
5x100
57.1 mm
7.5Jx17
ET44
215/40R17
Vehicles with the same PCD and centre bore
Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Polo 6R without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.
A Volkswagen Polo 6R (2009–2017) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.
Does a Volkswagen Polo 6R need a hub centric ring?
The centre bore (hub diameter) of a Volkswagen Polo 6R is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Volkswagen Polo 6R?
The recorded original offset is ET35 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Volkswagen Polo 6R?
The specified tightening torque is 125 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Volkswagen Polo 6R?
With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Volkswagen Taigo, Volkswagen T-Cross, Volkswagen Polo AW, Volkswagen Cross Polo. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more