Chevrolet Biscayne PCD

1971–1976

VERIFIED

Centre bore78.1 mm

Fixing typeEcrous - 14x1.50

Tightening torque120 Nm

Hub centric rings 78.1 mm → Wheel spacers 5x127(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Biscayne

A Chevrolet Biscayne (1971–1976) uses a 5x127 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x127 required. See all vehicles with 5x127.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Fixings: thread Ecrous - 14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x127 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Biscayne without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Astro Van 1985–2003 Chevrolet C10 1973–1987 Chevrolet Caprice 1971–1977 Chevrolet G20 Van 1971–1996 Chevrolet Impala 1957–1971 Chevrolet Bel Air 1955–1970 Buick Roadmaster 1991–1998 GMC Safari 1985–2002 Cadillac Fleetwood Brougham 1977–1986 Oldsmobile Custom Cruiser 1976–1992 Cadillac Seville 1975–1979 Ford Thunderbird 1973–1978 Pontiac Catalina 1971–1976 Oldsmobile Tornado 1966–1978 Buick Riviera 1964–1978

Will wheels from another vehicle fit your Biscayne?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x127 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Jeep Gladiator ⌀71.5 Jeep Cherokee ⌀71.6 Jeep Grand Cherokee SRT ⌀71.5 Fiat Freemont ⌀71.5 Lancia Voyager ⌀71.5 Dodge Journey ⌀71.6 Dodge Charger ⌀71.6 Jeep Commander ⌀71.6

Frequently asked questions

What is the PCD of a Chevrolet Biscayne?

A Chevrolet Biscayne (1971–1976) has a PCD of 5x127: 5 studs or bolts spaced around a circle 127 mm in diameter.

Does a Chevrolet Biscayne need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Biscayne is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What tightening torque for the wheels of a Chevrolet Biscayne?

The specified tightening torque is 120 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Biscayne?

With the same PCD (5x127) and the same centre bore (78.1 mm), these include: Chevrolet Astro Van, Chevrolet C10, Chevrolet Caprice, Chevrolet G20 Van. Offset, width and rim diameter still need checking for each vehicle.

Other Chevrolet models

Corvette C8 5x120 Bolt EV 5x105 Spark M400 4x100 Trax 5x105 Corvette C7 5x120.65 Volt 5x115 Aveo 4 trou 4x100 Aveo 5 trou 5x105 Orlando 5x115 Silverado 2500 8x180 Spark M300 4x100 Cruze Essence 5x105 All Chevrolet →

Does a value look wrong, or is a version missing? Let us know, we check every report.