Buick Riviera PCD

1964–1978

VERIFIED

Centre bore78.1 or 70.3 mm

Offset (ET)ET43

Fixing type-

⚠ This model comes with 5x127 or 5x115 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 78.1 mm → Wheel spacers 5x127(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Buick Riviera

A Buick Riviera (1964–1978) uses a 5x127 or 5x115 PCD and a centre bore of 78.1 or 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x127 or 5x115 required. See all vehicles with 5x127.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Offset: the original is ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x127	78.1 mm	—	—	—
Version 2	5x115	70.3 mm	—	ET43	—

Vehicles with the same PCD and centre bore

Same 5x127 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Buick Riviera without rings. Offset, width, diameter and caliper clearance still need checking.

Buick Roadmaster 1991–1998 Chevrolet Astro Van 1985–2003 GMC Safari 1985–2002 Cadillac Fleetwood Brougham 1977–1986 Oldsmobile Custom Cruiser 1976–1992 Cadillac Seville 1975–1979 Chevrolet C10 1973–1987 Ford Thunderbird 1973–1978 Chevrolet Biscayne 1971–1976 Chevrolet Caprice 1971–1977 Chevrolet G20 Van 1971–1996 Pontiac Catalina 1971–1976 Oldsmobile Tornado 1966–1978 Chevrolet Impala 1957–1971 Chevrolet Bel Air 1955–1970

Will wheels from another vehicle fit your Riviera?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x127 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Jeep Gladiator ⌀71.5 Jeep Cherokee ⌀71.6 Jeep Grand Cherokee SRT ⌀71.5 Fiat Freemont ⌀71.5 Lancia Voyager ⌀71.5 Dodge Journey ⌀71.6 Dodge Charger ⌀71.6 Jeep Commander ⌀71.6

Frequently asked questions

What is the PCD of a Buick Riviera?

A Buick Riviera (1964–1978) can have a 5x127 or 5x115 PCD depending on the version: check on an original wheel.

Does a Buick Riviera need a hub centric ring?

The centre bore (hub diameter) of a Buick Riviera is 78.1 or 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Buick Riviera?

The recorded original offset is ET43 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Buick Riviera?

With the same PCD (5x127) and the same centre bore (78.1 mm), these include: Buick Roadmaster, Chevrolet Astro Van, GMC Safari, Cadillac Fleetwood Brougham. Offset, width and rim diameter still need checking for each vehicle.

Other Buick models

Envision 5x120 Encore 5x105 Enclave 6x132 Lucerne 5x115 LaCrosse 5x115 Terraza 6x115 Rainier 6x127 Rendezvous 5x115 Park Avenue 5x115 Roadmaster 5x127 Apollo 5x120.65 Century 5x100 All Buick →

Does a value look wrong, or is a version missing? Let us know, we check every report.