FRENES

Daihatsu Rocky PCD

1987–1992
VERIFIED
⌀108
PCD5x139.7
Centre bore108 mm
Offset (ET)ET19
Fixing typeEcrous - 12x1.50
Tightening torque99 Nm
Original tyres225/80R15
Hub centric rings 108 mm → Wheel spacers 5x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Daihatsu Rocky

A Daihatsu Rocky (1987–1992) uses a 5x139.7 PCD and a centre bore of 108 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x139.7 required. See all vehicles with 5x139.7.
  • Centre bore: the wheel must have a centre bore of 108 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 108 mm.
  • Offset: the original is ET19. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 99 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/80R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x139.7 108 mm — ET19 —
Version 2 5x139.7 108 mm — ET19 225/80R15

Vehicles with the same PCD and centre bore

Same 5x139.7 PCD and same 108 mm centre bore: wheels from these vehicles bolt on and centre on a Daihatsu Rocky without rings. Offset, width, diameter and caliper clearance still need checking.

Jeep CJ7 1976–1986

Will wheels from another vehicle fit your Rocky?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Daihatsu Rocky?

A Daihatsu Rocky (1987–1992) has a PCD of 5x139.7: 5 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Daihatsu Rocky need a hub centric ring?

The centre bore (hub diameter) of a Daihatsu Rocky is 108 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Daihatsu Rocky?

The recorded original offset is ET19 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Daihatsu Rocky?

The specified tightening torque is 99 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Daihatsu Rocky?

With the same PCD (5x139.7) and the same centre bore (108 mm), these include: Jeep CJ7. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.