Hyundai Lantra PCD

1991–2000

VERIFIED

Centre bore67.1 mm

Offset (ET)ET46

Fixing typeEcrous - 12x1.50

Hub centric rings 67.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Lantra

A Hyundai Lantra (1991–2000) uses a 4x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Lantra without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Matrix 2001–2010 Hyundai Atos 1997–2000 Hyundai Coupe 1996–2002 Hyundai Accent 1994–1999 Hyundai Excel 1994–1999 Hyundai Sonata 1993–1998 Hyundai Elantra 1991–2000 Hyundai Pony 1990–1994 Smart Forfour 2004–2007 Kia Cerato 2003–2008 Mitsubishi Lancer 1.3i, 1.6i 2003–2008 Kia Carens 2000–2006 Kia Magentis 2000–2005 Kia Optima 2000–2005 Mitsubishi Carisma 1.6, 1.8GDi,1.9TD 2000–2004 Kia Joice 1999–2002

Will wheels from another vehicle fit your Lantra?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Chevrolet Evanda ⌀56.6 Chevrolet Lacetti ⌀56.6

Frequently asked questions

What is the PCD of a Hyundai Lantra?

A Hyundai Lantra (1991–2000) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai Lantra need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Lantra is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Lantra?

The recorded original offset is ET46. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai Lantra?

With the same PCD (4x114.3) and the same centre bore (67.1 mm), these include: Hyundai Matrix, Hyundai Atos, Hyundai Coupe, Hyundai Accent. Offset, width and rim diameter still need checking for each vehicle.

Other Hyundai models

Inster 4x100 IONIQ 6 5x114.3 Stargazer 5x114.3 Bayon 4x100 Staria 6x139.7 IONIQ 5 N 5x114.3 IONIQ 5 5x114.3 i20 III 4x100 Tucson IV 5x114.3 i10 III 4x100 Nexo 5x114.3 i30 III 5x114.3 All Hyundai →

Does a value look wrong, or is a version missing? Let us know, we check every report.