Mazda 323 PCD

1977–1980

VERIFIED

Centre bore59.6 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Tightening torque100 Nm

Original tyres155/80R13

Hub centric rings 59.6 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda 323

A Mazda 323 (1977–1980) uses a 4x114.3 PCD and a centre bore of 59.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 59.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.6 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 155/80R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 59.6 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda 323 without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda 121 1988–1991 Mazda 626 1979–1982 Mazda RX-7 1979–1983 Mazda 929 1973–1981

Will wheels from another vehicle fit your 323?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mazda 323?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Mazda 121 1988–1991 Wheels from Mazda 626 1979–1982 Wheels from Mazda RX-7 1979–1983

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 59.6 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1 Chevrolet Evanda ⌀56.6

Frequently asked questions

What is the PCD of a Mazda 323?

A Mazda 323 (1977–1980) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mazda 323 need a hub centric ring?

The centre bore (hub diameter) of a Mazda 323 is 59.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda 323?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda 323?

The specified tightening torque is 100 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mazda 323?

With the same PCD (4x114.3) and the same centre bore (59.6 mm), these include: Mazda 121, Mazda 626, Mazda RX-7, Mazda 929. Offset, width and rim diameter still need checking for each vehicle.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.