Mercedes G-Classe W461 PCD

1991–1997

VERIFIED

Centre bore84.1 mm

Offset (ET)ET63

Fixing typeM14x1.50

Tightening torque110 Nm

Hub centric rings 84.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes G-Classe W461

A Mercedes G-Classe W461 (1991–1997) uses a 5x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
Offset: the original is ET63. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes G-Classe W461 without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes G-Classe W465 from 2024 Mercedes Spinter 1995–1999 Mercedes Sprinter 1995–2000 Mercedes G-Classe W463 1990–2024 Mercedes G-Classe W460 1979–1991 Ssang Yong Actyon from 2006 Ssang Yong Kyron 2005–2016 Ssang Yong Rodius from 2005 Ssang Yong Rexton 2001–2006 Volkswagen LT 28,35 2000–2006 Volkswagen LT 28,35,46 1996–2006

Will wheels from another vehicle fit your G-Classe W461?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 84.1 mm, and will not fit if it is smaller.

Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6 Lamborghini Urus axe arrière ⌀71.6

Frequently asked questions

What is the PCD of a Mercedes G-Classe W461?

A Mercedes G-Classe W461 (1991–1997) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Mercedes G-Classe W461 need a hub centric ring?

The centre bore (hub diameter) of a Mercedes G-Classe W461 is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes G-Classe W461?

The recorded original offset is ET63. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes G-Classe W461?

The specified tightening torque is 110 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes G-Classe W461?

With the same PCD (5x130) and the same centre bore (84.1 mm), these include: Mercedes G-Classe W465, Mercedes Spinter, Mercedes Sprinter, Mercedes G-Classe W463. Offset, width and rim diameter still need checking for each vehicle.

Other Mercedes models

G-Classe W465 5x130 E-Classe W214 5x112 EQE 5x112 EQA 5x112 eSprinter 6x130 EQS 5x112 EQB 5x112 C-Classe 206 5x112 EQV 5x112 EQC 5x112 GLB-Classe 5x112 A-Classe W177 5x112 All Mercedes →

Does a value look wrong, or is a version missing? Let us know, we check every report.