FRENES

Mercedes G-Classe W463 PCD

1990–2024
VERIFIED
⌀84.1
PCD5x130
Centre bore84.1 mm
Offset (ET)ET43 to ET63
Fixing typeM14x1.50
Tightening torque130 Nm
Original tyres265/60R18
Hub centric rings 84.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes G-Classe W463

A Mercedes G-Classe W463 (1990–2024) uses a 5x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
  • Offset: the original is ET43 to ET63. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 265/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x130 84.1 mm — ET63 —
Version 2 5x130 84.1 mm — ET43 265/60R18

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes G-Classe W463 without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes G-Classe W465 from 2024 Mercedes Spinter 1995–1999 Mercedes Sprinter 1995–2000 Mercedes G-Classe W461 1991–1997 Mercedes G-Classe W460 1979–1991 Ssang Yong Actyon from 2006 Ssang Yong Kyron 2005–2016 Ssang Yong Rodius from 2005 Ssang Yong Rexton 2001–2006 Volkswagen LT 28,35 2000–2006 Volkswagen LT 28,35,46 1996–2006

Will wheels from another vehicle fit your G-Classe W463?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes G-Classe W463?

A Mercedes G-Classe W463 (1990–2024) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Mercedes G-Classe W463 need a hub centric ring?

The centre bore (hub diameter) of a Mercedes G-Classe W463 is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes G-Classe W463?

The recorded original offset is ET43 to ET63 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes G-Classe W463?

The specified tightening torque is 130 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes G-Classe W463?

With the same PCD (5x130) and the same centre bore (84.1 mm), these include: Mercedes G-Classe W465, Mercedes Spinter, Mercedes Sprinter, Mercedes G-Classe W461. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.