FRENES

Toyota Hi-Ace 2WD PCD

1989–1995
VERIFIED
⌀67.1
PCD5x114.3 or 6x139.7
Centre bore67.1 or 106 mm
Offset (ET)ET29 to ET35
Fixing typeEcrous - 12x1.50
Tightening torque102 Nm
Original tyres195/70R15
⚠ This model comes with 5x114.3 or 6x139.7 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Hi-Ace 2WD

A Toyota Hi-Ace 2WD (1989–1995) uses a 5x114.3 or 6x139.7 PCD and a centre bore of 67.1 or 106 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 6x139.7 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET29 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 102 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/70R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm — ET35 —
Version 2 6x139.7 106 mm — ET29 195/70R15

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Hi-Ace 2WD without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota HiLux 2WD 1986–2005 Kia EV3 from 2024 Mazda CX-80 from 2024 Mazda Mazda6e from 2024 Suzuki E-Vitara from 2024 Ferrari Purosangue from 2023 Kia EV9 from 2023 Faw - Hongqi H5 from 2022 Ferrari 296 GTB from 2022 Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Mazda CX-60 from 2022 Faw - Hongqi E-QM5 from 2021 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Kia EV6 from 2021

Will wheels from another vehicle fit your Hi-Ace 2WD?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota Hi-Ace 2WD?

A Toyota Hi-Ace 2WD (1989–1995) can have a 5x114.3 or 6x139.7 PCD depending on the version: check on an original wheel.

Does a Toyota Hi-Ace 2WD need a hub centric ring?

The centre bore (hub diameter) of a Toyota Hi-Ace 2WD is 67.1 or 106 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Hi-Ace 2WD?

The recorded original offset is ET29 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Hi-Ace 2WD?

The specified tightening torque is 102 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Hi-Ace 2WD?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Toyota HiLux 2WD, Kia EV3, Mazda CX-80, Mazda Mazda6e. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.