FRENES

Toyota HiLux 2WD PCD

1986–2005
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET29 to ET50
Fixing typeEcrous - 12x1.50
Tightening torque120 Nm
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota HiLux 2WD

A Toyota HiLux 2WD (1986–2005) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET29 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm — ET29 —
Version 2 5x114.3 67.1 mm — ET50 —

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota HiLux 2WD without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Hi-Ace 2WD 1989–1995 Kia EV3 from 2024 Mazda CX-80 from 2024 Mazda Mazda6e from 2024 Suzuki E-Vitara from 2024 Ferrari Purosangue from 2023 Kia EV9 from 2023 Faw - Hongqi H5 from 2022 Ferrari 296 GTB from 2022 Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Mazda CX-60 from 2022 Faw - Hongqi E-QM5 from 2021 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Kia EV6 from 2021

Will wheels from another vehicle fit your HiLux 2WD?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota HiLux 2WD?

A Toyota HiLux 2WD (1986–2005) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Toyota HiLux 2WD need a hub centric ring?

The centre bore (hub diameter) of a Toyota HiLux 2WD is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota HiLux 2WD?

The recorded original offset is ET29 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota HiLux 2WD?

The specified tightening torque is 120 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota HiLux 2WD?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Toyota Hi-Ace 2WD, Kia EV3, Mazda CX-80, Mazda Mazda6e. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.