A Toyota FJ Cruiser (from 2006) uses a 6x139.7 PCD and a centre bore of 106 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 106 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 106 mm.
Offset: the original is ET16. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 265/70R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 6x139.7 PCD and same 106 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota FJ Cruiser without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 106 mm, and will not fit if it is smaller.
A Toyota FJ Cruiser (from 2006) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Toyota FJ Cruiser need a hub centric ring?
The centre bore (hub diameter) of a Toyota FJ Cruiser is 106 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Toyota FJ Cruiser?
The recorded original offset is ET16. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Toyota FJ Cruiser?
The specified tightening torque is 110 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Toyota FJ Cruiser?
With the same PCD (6x139.7) and the same centre bore (106 mm), these include: Toyota 4 Runner, Toyota Land Cruiser Prado, Toyota Sequoia, Toyota Tundra. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more