A Toyota Land Cruiser Prado (2002–2009) uses a 6x139.7 PCD and a centre bore of 106 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 106 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 106 mm.
Offset: the original is ET30. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 265/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 6x139.7 PCD and same 106 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Land Cruiser Prado without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 106 mm, and will not fit if it is smaller.
A Toyota Land Cruiser Prado (2002–2009) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Toyota Land Cruiser Prado need a hub centric ring?
The centre bore (hub diameter) of a Toyota Land Cruiser Prado is 106 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Toyota Land Cruiser Prado?
The recorded original offset is ET30. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Toyota Land Cruiser Prado?
The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Toyota Land Cruiser Prado?
With the same PCD (6x139.7) and the same centre bore (106 mm), these include: Toyota FJ Cruiser, Toyota 4 Runner, Toyota Sequoia, Toyota Tundra. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more