FRENES

Toyota HiLux 4WD PCD

1989–1999
VERIFIED
⌀106
PCD6x139.7
Centre bore106 mm
Offset (ET)ET8 to ET30
Fixing typeEcrous - 12x1.50
Tightening torque120 Nm
Original tyres255/70R15
Hub centric rings 106 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota HiLux 4WD

A Toyota HiLux 4WD (1989–1999) uses a 6x139.7 PCD and a centre bore of 106 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x139.7 required. See all vehicles with 6x139.7.
  • Centre bore: the wheel must have a centre bore of 106 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 106 mm.
  • Offset: the original is ET8 to ET30. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/70R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 106 mm — ET30 —
Version 2 6x139.7 106 mm — ET8 —
Version 3 6x139.7 106 mm — ET30 255/70R15

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 106 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota HiLux 4WD without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota FJ Cruiser from 2006 Toyota 4 Runner from 2003 Toyota Land Cruiser Prado 2002–2009 Toyota Sequoia 2001–2007 Toyota Tundra 1999–2007 Toyota Land Cruiser J90 1996–2002 Toyota Tacoma 1995–2004 Toyota Hi-Ace 2WD 1989–1995 Lexus GX460 from 2009 Lexus GX470 2002–2009

Will wheels from another vehicle fit your HiLux 4WD?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota HiLux 4WD?

A Toyota HiLux 4WD (1989–1999) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Toyota HiLux 4WD need a hub centric ring?

The centre bore (hub diameter) of a Toyota HiLux 4WD is 106 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota HiLux 4WD?

The recorded original offset is ET8 to ET30 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota HiLux 4WD?

The specified tightening torque is 120 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota HiLux 4WD?

With the same PCD (6x139.7) and the same centre bore (106 mm), these include: Toyota FJ Cruiser, Toyota 4 Runner, Toyota Land Cruiser Prado, Toyota Sequoia. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.