Mitsubishi Lancer PCD

1988–1992

VERIFIED

Centre bore67.1 or 56.1 mm

Offset (ET)ET45 to ET46

Fixing typeEcrous - 12x1.50

Tightening torque130 Nm

Original tyres175/70R13, 205/60R16

⚠ This model comes with 4x114.3 or 4x100 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 67.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mitsubishi Lancer

A Mitsubishi Lancer (1988–1992) uses a 4x114.3 or 4x100 or 5x114.3 PCD and a centre bore of 67.1 or 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 or 4x100 or 5x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET45 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/70R13, 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x114.3	67.1 mm	—	ET46	—
Version 2	4x100	56.1 mm	—	ET45	175/70R13
Version 3	5x114.3	67.1 mm	—	ET46	205/60R16

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi Lancer without rings. Offset, width, diameter and caliper clearance still need checking.

Mitsubishi Lancer 1.3i, 1.6i 2003–2008 Mitsubishi Carisma 1.6, 1.8GDi,1.9TD 2000–2004 Mitsubishi Space Star 1998–2005 Mitsubishi Carisma 1.8i 1995–2001 Mitsubishi Lancer EVO III 1995–1996 Mitsubishi Lancer EVO II 1994–1995 Mitsubishi Lancer EVO I 1992–1994 Mitsubishi Space Runner 1991–1999 Mitsubishi Space Wagon 1991–1999 Mitsubishi Galant 1989–1992 Mitsubishi Colt 1988–1992 Mitsubishi Sapporo 1985–1990 Mitsubishi Cordia 1982–1990 Mitsubishi Starion 1982–1991 Smart Forfour 2004–2007 Kia Cerato 2003–2008

Will wheels from another vehicle fit your Lancer?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mitsubishi Lancer?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Mitsubishi Eclipse Cross from 2017 Wheels from Mitsubishi ASX 2010–2023 Wheels from Mitsubishi Grandis 2004–2011 Wheels from Mitsubishi Outlander 2003–2007

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Chevrolet Evanda ⌀56.6 Chevrolet Lacetti ⌀56.6

Frequently asked questions

What is the PCD of a Mitsubishi Lancer?

A Mitsubishi Lancer (1988–1992) can have a 4x114.3 or 4x100 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Mitsubishi Lancer need a hub centric ring?

The centre bore (hub diameter) of a Mitsubishi Lancer is 67.1 or 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mitsubishi Lancer?

The recorded original offset is ET45 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mitsubishi Lancer?

The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mitsubishi Lancer?

With the same PCD (4x114.3) and the same centre bore (67.1 mm), these include: Mitsubishi Lancer 1.3i, 1.6i, Mitsubishi Carisma 1.6, 1.8GDi,1.9TD, Mitsubishi Space Star, Mitsubishi Carisma 1.8i. Offset, width and rim diameter still need checking for each vehicle.

Other Mitsubishi models

Eclipse Cross 5x114.3 ASX 5x114.3 i-MiEV 4x100 Lancer EVO X 5x114.3 Lancer EVO IX 5x114.3 Grandis 5x114.3 Lancer 1.3i, 1.6i 4x114.3 Outlander 5x114.3 Lancer EVO VIII 5x114.3 Lancer 2.0i 5x114.3 Airtrek 5x114.3 Lancer EVO VII 5x114.3 All Mitsubishi →

Does a value look wrong, or is a version missing? Let us know, we check every report.