FRENES

Seat Toledo PCD

1991–1998
VERIFIED
⌀57.1
PCD5x100 or 4x100 or 5x112
Centre bore57.1 mm
Offset (ET)ET38 to ET50
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres175/70R13, 175/80R14, 205/55R16, 185/60R15
⚠ This model comes with 5x100 or 4x100 or 5x112 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Seat Toledo

A Seat Toledo (1991–1998) uses a 5x100 or 4x100 or 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 or 4x100 or 5x112 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET38 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R13, 175/80R14, 205/55R16, 185/60R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 57.1 mm — ET45 175/70R13
Version 2 5x100 57.1 mm — ET38 175/80R14
Version 3 5x112 57.1 mm — ET50 205/55R16
Version 4 5x100 57.1 mm — ET38 185/60R15

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Seat Toledo without rings. Offset, width, diameter and caliper clearance still need checking.

Seat Arona from 2017 Seat Ibiza V from 2017 Seat Ibiza ST from 2010 Seat Leon Cupra R 2002–2006 Seat Leon I 1999–2005 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Audi A1 Citycarver 2019–2022 Skoda Kamiq from 2019 Skoda Scala from 2019 Volkswagen T-Cross from 2019 Volkswagen Polo AW from 2017

Will wheels from another vehicle fit your Toledo?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Seat Toledo?

A Seat Toledo (1991–1998) can have a 5x100 or 4x100 or 5x112 PCD depending on the version: check on an original wheel.

Does a Seat Toledo need a hub centric ring?

The centre bore (hub diameter) of a Seat Toledo is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Seat Toledo?

The recorded original offset is ET38 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Seat Toledo?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Seat Toledo?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Seat Arona, Seat Ibiza V, Seat Ibiza ST, Seat Leon Cupra R. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.