FRENES

Seat Toledo IV PCD

2012–2019
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET35 to ET46
Fixing typeM14x1.5
Tightening torque120 Nm
Original tyres175/70R14, 185/60R15, 195/50R16, 215/45R16
Toledo KG/NH, jumelle de la Skoda Rapid.
Wheel spacers for this vehicle, from €29.95(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Seat Toledo IV

A Seat Toledo IV (2012–2019) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET35 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14, 185/60R15, 195/50R16, 215/45R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Seat Toledo

Previous generation: Seat Toledo (1991–1998) — the bolt pattern changes (5x100 instead of 4x100): the wheels are not interchangeable.

Toledo 1991–1998 · 4x100 Toledo IV 2012–2019

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm 5Jx14 ET35 175/70R14
Version 2 5x100 57.1 mm 6Jx15 ET38 185/60R15
Version 3 5x100 57.1 mm 6.5Jx16 ET41 195/50R16
Version 4 5x100 57.1 mm 7Jx16 ET46 215/45R16
Version 5 5x100 57.1 mm 7Jx17 ET46 215/40R17

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Seat Toledo IV without rings. Offset, width, diameter and caliper clearance still need checking.

Seat Arona from 2017 Seat Ibiza V from 2017 Seat Ibiza ST from 2010 Seat Ibiza IV 2008–2017 Seat Leon Cupra R 2002–2006 Seat Leon I 1999–2005 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Seat Toledo 1991–1998 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Audi A1 Citycarver 2019–2022 Skoda Kamiq from 2019 Skoda Scala from 2019

Will wheels from another vehicle fit your Toledo IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Seat Toledo IV?

A Seat Toledo IV (2012–2019) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Seat Toledo IV need a hub centric ring?

The centre bore (hub diameter) of a Seat Toledo IV is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Seat Toledo IV?

The recorded original offset is ET35 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Seat Toledo IV?

The specified tightening torque is 120 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Seat Toledo IV?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Seat Arona, Seat Ibiza V, Seat Ibiza ST, Seat Ibiza IV. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.