FRENES

Seat Cordoba PCD

1993–2002
VERIFIED
⌀57.1
PCD4x100 or 5x100
Centre bore57.1 mm
Offset (ET)ET39 to ET45
Fixing typeM12x1.50
Tightening torque110 Nm
Original tyres175/70R13
⚠ This model comes with 4x100 or 5x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Seat Cordoba

A Seat Cordoba (1993–2002) uses a 4x100 or 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 5x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET39 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 57.1 mm — ET45 175/70R13
Version 2 5x100 57.1 mm — ET39 —

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Seat Cordoba without rings. Offset, width, diameter and caliper clearance still need checking.

Seat Mii 2012–2021 Seat Arosa 1997–2005 Seat Inca 1995–2003 Seat Ibiza 1993–2002 Seat Toledo 1991–1998 Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Skoda Citigo 2012–2020 Volkswagen Up 2011–2023 Chery Amulet from 2006 Volkswagen Lupo GTI 2002–2005 Audi A2 1.2 TDI 2000–2006 Volkswagen Lupo 1998–2005 Skoda Felicia Pickup 1996–2001 Skoda Felicia 1994–2001

Will wheels from another vehicle fit your Cordoba?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Seat Cordoba?

A Seat Cordoba (1993–2002) can have a 4x100 or 5x100 PCD depending on the version: check on an original wheel.

Does a Seat Cordoba need a hub centric ring?

The centre bore (hub diameter) of a Seat Cordoba is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Seat Cordoba?

The recorded original offset is ET39 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Seat Cordoba?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Seat Cordoba?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Seat Mii, Seat Arosa, Seat Inca, Seat Ibiza. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.