Seat Arona PCD

from 2017

VERIFIED

Centre bore57.1 mm

Offset (ET)ET45

Fixing typeM14x1.50

Tightening torque120 Nm

Original tyres195/60R16

Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Seat Arona

A Seat Arona (from 2017) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x100 required. See all vehicles with 5x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Seat Arona without rings. Offset, width, diameter and caliper clearance still need checking.

Seat Ibiza V from 2017 Seat Ibiza ST from 2010 Seat Leon Cupra R 2002–2006 Seat Leon I 1999–2005 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Seat Toledo 1991–1998 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Audi A1 Citycarver 2019–2022 Skoda Kamiq from 2019 Skoda Scala from 2019 Volkswagen T-Cross from 2019 Volkswagen Polo AW from 2017

Will wheels from another vehicle fit your Arona?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Seat Arona?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Seat Ibiza V from 2017 Wheels from Seat Leon I 1999–2005 Wheels from Seat Toledo 1991–1998 Wheels from MG Astor from 2021

Same PCD, different centre bore

These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Mazda Mazda2 Hybrid ⌀54.1 Toyota Aygo X ⌀60.1 Toyota Yaris IV ⌀54.1 Toyota Corolla US ⌀54.1 Subaru BRZ ⌀56.1 Toyota GT 86 ⌀56.1 Lexus CT200h ⌀54.1 Subaru XV ⌀56.1

Frequently asked questions

What is the PCD of a Seat Arona?

A Seat Arona (from 2017) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Seat Arona need a hub centric ring?

The centre bore (hub diameter) of a Seat Arona is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Seat Arona?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Seat Arona?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Seat Arona?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Seat Ibiza V, Seat Ibiza ST, Seat Leon Cupra R, Seat Leon I. Offset, width and rim diameter still need checking for each vehicle.

Other Seat models

Leon Cupra Sportstourer 5x112 Leon IV 5x112 Tarraco 5x112 Ibiza V 5x100 Ateca 5x112 Leon Cupra ST 5x112 Leon Cupra 5x112 Leon III 5x112 Mii 4x100 Ibiza ST 5x100 Exeo 5x112 Altea Freetrack 5x112 All Seat →

Does a value look wrong, or is a version missing? Let us know, we check every report.