FRENES

Seat Ibiza IV PCD

2008–2017
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET35 to ET44
Fixing typeM14x1.5
Original tyres175/70R14, 175/65R15, 185/60R15, 195/50R16
Restylage 2013 identique
Wheel spacers for this vehicle, from €29.95(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Seat Ibiza IV

A Seat Ibiza IV (2008–2017) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET35 to ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14, 175/65R15, 185/60R15, 195/50R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Seat Ibiza

Previous generation: Seat Ibiza (1993–2002) — the bolt pattern changes (5x100 instead of 4x100): the wheels are not interchangeable. Next generation: Seat Ibiza V (from 2017) — same 5x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Ibiza 1993–2002 · 4x100 Ibiza IV 2008–2017 Ibiza V from 2017 · 5x100

All recorded versions (7)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm 5Jx14 ET35 175/70R14
Version 2 5x100 57.1 mm 6Jx15 ET38 175/65R15
Version 3 5x100 57.1 mm 6Jx15 ET38 185/60R15
Version 4 5x100 57.1 mm 6Jx16 ET40 195/50R16
Version 5 5x100 57.1 mm 7Jx16 ET43 215/45R16
Version 6 5x100 57.1 mm 7Jx17 ET43 215/40R17
Version 7 5x100 57.1 mm 7.5Jx17 ET44 215/40R17

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Seat Ibiza IV without rings. Offset, width, diameter and caliper clearance still need checking.

Seat Arona from 2017 Seat Ibiza V from 2017 Seat Toledo IV 2012–2019 Seat Ibiza ST from 2010 Seat Leon Cupra R 2002–2006 Seat Leon I 1999–2005 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Seat Toledo 1991–1998 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Audi A1 Citycarver 2019–2022 Skoda Kamiq from 2019 Skoda Scala from 2019

Will wheels from another vehicle fit your Ibiza IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Seat Ibiza IV?

A Seat Ibiza IV (2008–2017) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Seat Ibiza IV need a hub centric ring?

The centre bore (hub diameter) of a Seat Ibiza IV is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Seat Ibiza IV?

The recorded original offset is ET35 to ET44 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Seat Ibiza IV?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Seat Arona, Seat Ibiza V, Seat Toledo IV, Seat Ibiza ST. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.